Home » Loadcells » Pancake Type Loadcell

Pancake Type Load Cell

Back

This is a Low profile compression and tension wheel style loadcell, Its heat treated alloysteel construction makes it very rugged and capable of absorbing shock loads. It is used for electronic truck scale, rail scale, tensile testing, impact testing, tank and silos level monitoring, material testing and other industrial weighing system suitable for multiform environment.

Features

	Heat treated alloysteel construction makes it very rugged Nickel plated
	Suitable for multiform environments
	Easy to Install & Use

Application

	Electronic Truck Scales
	Truck Scales, Hooper Scales
	Other Electronic Weighing Devices

Standard Capacities (T.)

1, 2, 3, 5, 10, 20, 25, 30

Standard Specification :
Nominal Output	2.0 ± 0.004mV/V (mili Volt per Volt)
Precision	C1 (0.05% FSO comprehensive error)
Excitation Voltage	9 VDC - Maximum 12 VDC
Repeatability	<±0.01% of FSO
Safe Load	120% of Rated Capacity
Ultimate Load	150% of Rated Capacity
Non Linearity	<±0.03% of FSO (Full Scale Output)
Creep (30 minutes)	<±0.03% of FSO
Zero Balance	<±1% of FSO
Input Resistance	700 ± 10 ohms
Output Resistance	700 ± 5 ohms
Insulation resistance	Above 5000 Mega ohms
Temp. Compensation	-10^oC to +60^oC
Temp. Effect on zero & span	< 0.03% FSO/10^oC
Material	Alloysteel and stainless steel
Cable	4mm, 12 mts

Dimension table:

Rated load	H1	H2	H3	M	D1	D2
5	67	46	34	M16×1.5	32	105
10	80	53.8	41	M32×1.5	41	121
20	85	53.8	47	M32×1.5	41	121
50
100