Home » Loadcells » Jewellery Loadcell (Aluminium)

CZL 651 Jewellery Load Cell

Back

It’s a strain gage based loadcells designed specially for jewellery weighing purpose. It is made of alluminium alloy of very high grade to give very precise results.

Features

	Up to 1,00,000 divisions short term precision
	Off-center load compensated
	Supports 200X200mm platform

Application

	Jewellery Scales
	Diamond Scales

Standard Capacities (Grams.)

20, 60, 300, 600, 1000, 1200, 2000, 3000

Standard Specification :
Nominal Output	1.6 ± 0.1 mV/V (mili Volt per Volt)
Precision	C2 / C3 (0.017% & 0.02% FSO comprehensive error)
Excitation Voltage	9 VDC - Maximum 12 VDC
Platter Size	200mm x 200mm
Safe Load	120% of Rated Capacity
Ultimate Load	150% of Rated Capacity
Non Linearity	<±0.03% of FSO (Full Scale Output)
Creep (30 minutes)	<±0.025% of FSO
Zero Balance	<±1% of FSO
Input Resistance	400 ± 10 ohms
Output Resistance	350 ± 5 ohms
Insulation resistance	Above 5000 Mega ohms
Temp. Compensation	-10^oC to +40^oC
Temp. Effect on zero & span	< 0.03% FSO/10^oC
Material	Alluminium alloy, Colourless anodized
Cable	4mm, 1Feet